- Manufacturer: Dufour
- Location: United Kingdom
- Year: 2014
- LOA: 36'9" (11.19m)
- Beam: 12' 8'' (3.86m)
- Berths: 6
- Draft: 1.91
- Keel: Fin keel
- ID no.: 1011004
- Cabins: 3
- Heads: 2
- Showers: 2
- Engine Make: Volvo Penta
- Horsepower: 30hp
- Drive Type: Saildrive
- Fuel Type: Diesel
- Engine Hours Port: 1
Accommodation
Interior:
Woodwork is real wood veneer in Moabi or light oak
Floors are Moabi laminate
Doors are fitted with twin-bolt anti-vibration locks, cabin doors can be blocked in the open position
Mattresses are in quilted, anallergic fabric.
Saloon cushions and cabin mattresses fitted with removable covers.
Head-liner white painted head-liner
Versions, 2 cabins/3 cabins
Glazing/lighting:
Hull has four fixed saloon ports
Coachroof has two large fixed ports
Coachroof opening has four opening ports with curtains
Hatches x four deck hatches
Two built-in ventilators
Numerous spots and reading lights
Forward cabin:
Berth: 227 × 140 cm approx
Mattress is 10 cm thick foam mattress with washable cover
Stowage
--Below berth.
--Cubby-hole along side of hull
--Hanging locker with shelves
--Removable wall pocket in forward bulkhead
--Bookshelf
--Shoe locker in podium
Water tank is below berth
Access to navigation instrument transducers
Saloon:
U-shaped banquette on port side
Central banquette is sliding (option)
Table with solid wood fiddles, removable cover with pad for hot dishes
Stowage
--Accessible via the hinged seat back
--Behind port banquette back
--Bookshelf above banquette
--Cupboards and 2 spaces for stowing bottle of water
--Removable fiddles
Stainless mast foot
Galley:
Longitudinal, starboard side galley configuration
Worktop in ‘Corian’ synthetic resin with solid wooden fiddle
Stainless steel sink, twin bowls with Corian synthetic resin covers, one of which can be used as a chopping board
Hot and cold pumped water with chrome-plated brass single-lever mixer tap
Two-burner gas cooker with oven on gimbals, with stainless rail and removable folding protective cover in Corian
Crockery storage, dowels to retain crockery when heeling
12 V electric refrigerator with removable storage bins and built-in bottle rack
Refrigerator access via the worktop
Stowage
--Cubby-hole with 4 compartments, 3 of them closed, with flap and removable fiddles
--4-door under-sink unit with cutlery drawer, 2 plastic bins, waste bin, drawer beneath cool-box, Vertical stowage for sink and other covers.
- Fitted with trap with bottle rack
- Under floor
Waste bin: Sort compartments
Other: Corian bottle compartment (in saloon table or galley)
Chart Table:
Hinged wooden seat with stowage
Cushion in leatherette
Stowage
- Large L-shaped chart table with tilt-up desk, on starboard side of companionway
- High-level closed bookcase with 2 fl aps and removable fi ddles and a compartment
- 1 fl exible light
- Storage column below table with door and drawer. Wall pocket beside seat
Storage space under table top
- Console with 2 flaps, storage space plus electrical distribution panel, removable front panel carrying the instruments
Radio/CD player with 2 speakers, MP3 compatible
12 V electrical distribution panel along chart table (3-cabin version)
Aft Cabin(s):
Berth size,194 × 140 cm approx
10 cm thick foam mattress with washable cover
Fuel tank beneath berth, starboard side
Water tank: Beneath berth, port side
Stowage:
- Stowage at base of hanging locker with hinged lid
- Double hanging locker with shelf and rail for coat hangers
- Cubby-hole along hull liner with fi ddle.
Steering gear access, hinged removable cover in Moabi
Soundproofing, double bulkhead provides acoustic and thermal insulation from adjoining engine compartment
Aft Head:
Manual sea toilet
Wash-basin unit with basin in Corian synthetic resin
Hot and cold water, chrome-plated brass single-lever mixer tap and shower head
Drain is direct, via an electric pump
Cupboards x one high-level and one door storage unit with mirror
Large mirror
Shower grating Corian synthetic resin
Ventilation via deck panel or opening port
Waterproof toilet roll holder, wall pocket with Plexiglas flap and towel rail
Mechanical and Rigging
Hull is hand-laminated in polyester/glassfibre
Decorative stripes on the hull
NPG gelcoat with first mat impregnated with NPG resin forming an optimum barrier against osmosis
Hull bottom counter-moulded, floors laminated into the hull.
Deck is sandwich with injected PVC foam core
Ballast, keel bolts bear on stainless back-plates
Rudder is a semi-elliptical shape, filled with closed-cell epoxy foam
StockSolid stainless steel
Non-slip structured deck surface.
Mechanics:
30 hp (22 kW) engine power
Sail-drive transmission
Cooling system, heat exchanger, anti-siphon valve
Fuel tank, gauge on electrical distribution panel
Fuel filter, fuel filter with water separator
Emergency fuel shut-off valve
Control panel close to helmsman, with hour meter and tachometer
Alternator with battery isolator
Ventilation with 2 natural inlets and electric mechanical extract
Separate engine bilge
Access to the engine from front and both sides
Twin blade, folding propeller
Insulation is carefully-designed foam acoustic and thermal insulation
Electrics:
12V Circuit
Distribution panel with 15 functions with circuit-breakers, voltmeter
Sockets 12 V on electrical distribution panel.
Isolator 1 per battery set in aft stbd cabin
Plumbing:
One polyethylene water tank with inspection holes and gauges
Electric bilge pump, with strainer, controlled from electrical distribution panel
Manual bilge pump operated from cockpit
Bilge sump, sump built into keel, access to strainer
Water-heater via heat-exchanger
Hot water tank, pressurized water pump unit
Shower waste pumped direct to the sea
Rigging:
Anodized aluminium with two levels of swept spreaders
9/10 fractional
Deck stepped mast
Anchor and masthead lights.
Boom topping lift cleat
Anodized aluminium boom fitted with two continuous reefig lines
Genoa roller furler
Continuous in stainless single-strand cable, chrome-plated bronze rigging screws, comprising: forestay, twin backstay, inter, and lower shrouds
Double backstay
Running rigging in pre-stretched textile including:main and genoa halyards, boom topping lift, main and genoa sheets, two continuous reefing lines, leech tensioner, two mainsheet car adjustments, furling line, and downhaul tackle
Sails:
Mainsail with two wide reef strips, with battens and bag
Genoa is a furling genoa with UV-protection
Inventory
Deep cast iron keel 1,9m
30hp Volvo Penta engine
Laminated floor boards in plain MOABI
Bora Bora saloon cushions
Roller blinds for deck hatches
Corian Galley Countertops
2 burner stove
Battery charger
Genoa furling system
Reefing line system led aft to cockpit
Cockpit seats in natural teak
Compass on each steering wheel console
Leather covered steering wheels
220V + shore power + outlets in cabins and saloon
Blue Sail kit: plain wood , new generation engine, high output alternator (115-140 Amps), LED navigation lights, sea water foot pump, injection/infusion deck, system carburizing anti-overflow, holding tank(s) with a large capacity, kit of biodegradable cleaning and hygiene products
Stainless steel bathing ladder
Wooden cockpit table with storage, 12V outlet
Dufour Yachts dining set
Wine cellar
Radio CD player with 2 speakers compatible for MP3
Extra service battery
Fullbatten mainsail
Rigid boom vang
Lazy-bag + lazy-jacks
2nd roof winch with organizer and clutches
2 loudspeakers in cockpit for radio/CD
Automatic shower pump
Cockpit shower (cold/hot)
Outboard engine bracket on pushpit
Sliding seat
Microwave
Sprayhood with hand rail
Main anchor, 6 fenders & 3 mooring lines
2 blade folding propeller
Deck:
Solid wood handrails on coachroof
Fixed toe rails x two, wooden
Anchor locker is moulded into the deck, self-draining with built-in windlass support and anchor chain eyebolt, lockable hatch cover
Bow pulpits has a seat to starboard, with individual green/red navigation lights
Stern pulpit with lifebuoy bracket, jackstaff bracket, navigation light, and opening life-lines with hook; outboard motor bracket (option)
Stanchions x eight with two rows of life-lines
Solid wooden toe-rail
Deck Fittings:
Single chainplate for cap shrouds and lower shrouds
Safety harness chainplates in cockpit floor
Two x backstay chainplates
Midships mooring cleats x two, aluminium
Mooring cleats x four, aluminium
Rubbing strips x six stainless, on hull sheerline
Fuel deck fillers x one
Water deck fillers x two
Mainsheet tracks, on coachroof with car
Genoa tracks with car
Pulleys two cheekblocks with jamcleat
Stainless swan-neck for electrical and electronic cables.
Deck organizers x two deck organizers, four-sheave (starboard ) and five-sheave (port ) for halyard, sheet, and reef line returns
Halyard winch
Sheet winches x two sheet winches
Jamcleats, two rows of jamcleats port / starboard level with the companionway
Furler line jamcleats, one at aft end of sidedeck
Hatch covers, halyard cover in injection-moulded polyester
Cockpit:
Cockpit bench seats are teak covered
Helmsman’s seat is teak covered
Cockpit lockers x two large side lockers, lids fitted with gas struts and fixings for padlocks
Helm, wheel steering
Helm console, made from polyester
Engine controls and control panel on starboard side of cockpit.
Compasses x two on columns
Instrumentation at helm position (port and starboard)
Gas locker is in the starboard aft locker
Stern door wings up, with built-in telescopic stainless bathingladder
BIB locker, life raft stows in dedicated locker fitted with ram belowstern door
Cold water transom shower
Shore supply connector in port stern locker
Bathing ladder is a telescopic stainless bathing ladder
Cockpit floor is non-slip polyester cockpit floor
Emergency tiller, Head of rudder stock beneath helmsman’s floor for fitting the emergency tiller
Contact NYB Plymouth
- Address:
Network Yacht Brokers Plymouth
Mayflower Marina
Ocean Quay
Richmond Walk
Plymouth
PL1 4LS - Telephone: (+44) 01752 605 377
- Fax: (+44) 01752 605 377
- Email: info@nybplymouth.com
- Link to full office details
Disclaimer : Network Yacht Brokers (Southwest) Ltd t/a Network Yacht Brokers Plymouth offers the details of this vessel for sale but cannot guarantee or warrant the accuracy of the information contained in the specification or warrant the condition of the vessel or equipment. A buyer should instruct his agents, or surveyors, to investigate such details as the buyer desires validated. This vessel is offered for sale subject to no prior sale, price change, or withdrawal without notice.